Yes, some condo walls can be removed. It depends on what the wall does, what runs through it and which approvals apply. Even a non-load-bearing wall can conceal shared plumbing, form part of a fire separation or require written strata approval. Find out what applies to your wall before you commit to a layout or book demolition.
Arani Construction’s North Vancouver condo renovation services include layout planning and coordination for work in occupied strata buildings.
Start with a sketch that shows exactly which wall you want to change. The same sketch can help your strata manager find the right building records, a professional assess the proposal and the municipal permit office tell you which application applies.
Which Condo Walls Can Be Removed?
Non-Load-Bearing Interior Partitions
An interior partition divides space within a suite. If it carries no building loads, plays no role in lateral support or fire separation, and can be removed without affecting shared services, it may be a candidate for removal. A partition can still carry wiring for your suite or conceal a duct that needs a new route. Your strata’s filed bylaws may also require written approval for the change.
Wall thickness, the sound it makes when tapped and symbols on a floor plan cannot establish whether it is structural. A sales floor plan is useful for marking the location, but it rarely identifies how the building carries loads. Even a structural drawing needs to be checked against what was built and what may have changed since.
Load-Bearing Walls and Shear Walls
A load-bearing wall transfers gravity loads, such as the weight of floors above, to the structure below. A shear wall resists sideways forces from wind or earthquakes. One wall can serve both functions. Even a doorway-sized opening can interrupt the route those forces take through the building.
A structural engineer registered in BC can assess whether the proposed opening or removal is feasible and what the building would need to accommodate it. A new beam, for example, may transfer loads to points that need support beyond your suite. The building may offer no practical way to provide that support, or the work may require access or approvals that are unavailable. Check feasibility before ordering cabinetry or finalising a floor plan that depends on the opening.
Fire Separations Between Units and Corridors
Walls between suites, beside common corridors or around service shafts may be part of assemblies that limit the spread of fire and smoke. Their performance can depend on the entire assembly, including doors and the treatment of openings where pipes or ducts pass through. A new opening can affect that protection even when the wall carries no structural load.
If the wall is beside a corridor, another suite or a shaft, flag it on the plan. Ask the permit office what code information it needs and whether the alteration requires design by a registered professional. Where an opening or penetration is permitted, the design needs to address the applicable fire protection requirements and show how the separation will be maintained.
Structural Assessment Before Demolition
Ask your strata council or manager for available architectural and structural drawings, mechanical plans and records of previous alterations. Give the assessor the building address, suite and floor number, photos and a sketch of the intended change. A structural engineer may compare the drawings with site conditions and review the relationship between the wall, nearby columns, floors above and below, and the building’s lateral system.
If drawings are missing or conflict with what is on site, ask the engineer what additional records or investigation would resolve the uncertainty. The municipality may have permit drawings on file and may require authorisation to release them. The engineer may also need access to another part of the building. Arrange that through strata and agree on any investigation that could disturb finishes before it takes place.
Ask for written findings that identify the wall assessed, the limits of the review and any conditions on the proposed work. A feasibility letter can help strata understand the proposal. For a structural alteration, the permit office may require sealed design drawings and applicable Letters of Assurance. When those letters apply, confirm who will carry out professional field reviews, when access is needed and which assurance documents are due at closeout. Municipal inspections have their own scheduling and documentation.
Hidden Utilities in Condo Walls
Wiring, supply and drain pipes, exhaust ducts and sprinkler lines can run behind an ordinary wall finish. A service riser carries services vertically between floors and may serve several suites. Mechanical and electrical drawings can help locate likely routes. If they leave gaps, have the appropriate professional or trade define what needs to be checked on site and arrange any required authorisation with strata.
Consider two hypothetical kitchen partitions. One contains wiring that serves only the suite. The other conceals a shared plumbing riser. The first may need an electrical contractor and a revised outlet layout. The second can bring in the strata’s building trades, affect access for future maintenance and lead to a layout that keeps the riser in place. The two walls could look identical from the living room.
Address hazardous materials before any investigation or work that will disturb suspect finishes. Where WorkSafeBC’s occupational health and safety rules apply, section 20.112 requires the owner and responsible employers to ensure a qualified person inspects for hazardous materials before renovation or demolition begins. Ask whether the written survey covers the exact wall and materials in your scope. If the assessment identifies asbestos or other hazardous materials, have the contractor coordinate the applicable controls and any required abatement before the materials are disturbed.
Strata Approval for Wall Removal
Strata Bylaws and Common Property
Request your building’s current bylaws and alteration procedure in writing from the strata corporation, usually through the strata manager or council. Ask for the strata plan and any relevant amendments or designations. The Land Title and Survey Authority’s strata records guide explains how to obtain the registered plan and check land title records.
Under BC’s Strata Property Act, the Standard Bylaws apply to the extent that different bylaws have not been filed. Standard Bylaw 5 requires written approval from the strata corporation for specified alterations to a strata lot, including work involving the building structure, common property within the lot or parts of the lot the corporation must insure. Standard Bylaw 6 requires written approval for alterations to common property, including limited common property, or common assets. Your building’s filed bylaws can change the approval requirements.
A pipe inside your suite can be common property if it is intended and able to serve another strata lot or common property. Limited common property is common property designated for the exclusive use of the owners of one or more strata lots. Ask who can authorise your particular scope. The strata council generally acts for the corporation. A significant change in the use or appearance of common property may require a three-quarter vote at a general meeting under section 71 of the Act.
Alteration Agreements and Supporting Documents
Ask for the building’s submission package before paying for drawings. Depending on the bylaws and the work, strata may request a written scope, existing and proposed plans, professional findings, contractor insurance and permit details. Ask which records it needs to consider the application and which it needs before work starts. In an occupied building, the package may also cover elevator bookings, work hours, protection of common areas and debris removal.
Read any alteration agreement for obligations involving future maintenance, repair costs or damage tied to the work. Check which drawings and conditions the written approval covers. If the scope changes after a service is found or an opening is redesigned, ask whether updated approval is needed. Arani Construction’s strata renovation guide covers the wider coordination involved in work on strata property.
North Shore Building Permits and Inspections
Check the building’s civic address against the municipal property map. A North Vancouver mailing address can be in the City or the District. Give the building permit office your suite number and marked plan, and explain what you know about structure, shared services and fire separations. Ask which permits apply and which stages must remain accessible for inspection.
- City of North Vancouver. Start with the City’s residential multi-family renovation guide. It calls for existing and proposed layouts, with removals identified, and a plan locating the suite on its floor. The City requires registered professional involvement for structural or base-building alterations. Its inspection guidance directs the permit holder to arrange inspections and supply any required professional review documents. For renovation closeout, retain the applicable final building and trade inspection approvals.
- District of North Vancouver. The Construction Bylaw requires a permit for alterations within its scope. Ask the Building Department which drawings and supporting documents it needs for your suite. The District’s submission instructions direct applicants to request an upload link for PDF documents. Confirm which inspections and final records apply, including whether framing or trade work must be inspected before it is covered.
- District of West Vancouver. Use the multi-family interior renovation checklist. For strata-titled buildings, it calls for a strata approval letter signed by the chairperson. It also asks for a room-by-room scope and plans showing the location of the suite and the walls to be removed. Structural changes require the documents specified in the checklist, including a structural Schedule B. Confirm any interim inspections and the documentation the District wants for final building approval.
Written strata approval addresses the corporation’s consent and conditions. A building permit addresses the scope the municipality authorises under its permit process. Where both are required, have both in place before work begins and confirm who will book the inspections.
Condo Wall Removal Costs
A straightforward partition may mainly involve labour, disposal and repairs where the wall met the floor and ceiling. Relocating services can add trade design, permits and building coordination. An engineered opening can add structural design, professional field reviews and work beyond the opening itself. If hazardous materials are present, price assessment and any required abatement as distinct items.
Ask for quotes in CAD based on the same drawings and scope. Check who pays building and trade permit fees, professional fees and any strata charges. Municipal permit fees can depend on the value of the work, so ask the permit office which fees apply to your scope. Ask whether the quote includes elevator protection, disposal and a floor patch or replacement. A patch can be difficult to match if the original flooring is out of production. Have each contractor identify allowances, exclusions, applicable taxes and how concealed conditions will be priced. For a larger project, Arani Construction’s North Vancouver condo renovation cost guide provides broader budgeting context.
Conclusion (Condo Wall Removal Checklist)
- Confirm the municipality from the civic address. Collect the strata plan, current filed bylaws, relevant building drawings and any previous alteration records.
- Have the wall and its services assessed. Identify structural and fire protection questions and arrange any required hazardous-material assessment before disturbance.
- Submit the agreed scope to strata. Obtain any required written approval and review the conditions or alteration agreement.
- Confirm building and trade permit requirements with the responsible office. Obtain the required permits and agree on inspection and professional review stages before work starts.
- Arrange the applicable inspections and field reviews. Keep approved plans, strata correspondence, final inspection records and any professional closeout documents.
If you’re planning a North Shore condo renovation, bring your proposed layout and any building records you have to Arani Construction to discuss the scope.
Frequently Asked Questions
1. Can I widen a doorway instead of removing the wall?
Possibly. First verify what the wall and existing opening do. A wider doorway may affect load transfer, require a change to wiring or alter a fire-rated assembly. Give the assessor and permit office the location and proposed width so they can determine which design documents and approvals the change requires.
2. Can I remove a condo wall myself?
Check whether your strata permits owner-performed work, what qualifications or insurance its approval requires, and who can hold any required permits. In the City of North Vancouver, the multi-family renovation guide specifies that trade contractors obtain the listed electrical, plumbing, gas and sprinkler permits. Confirm the rules for your address and scope with the permit office. Arrange any needed structural or service assessment before deciding who will carry out the work.
3. What if a previous owner removed a wall without approval?
Request strata correspondence, alteration agreements and available drawings. Ask the municipality for permit and inspection records for the suite. Have an appropriate professional compare the current layout with the available records and identify any structural, service or fire protection concerns. Take the findings to strata and the permit office and ask what they need next. Depending on what they find, they may ask for further documentation, investigation or corrective work.